DAP-X is used in iron and copper, no
It hurts tires and plastics but is not safe on fragile metals and
How to use
Used as is or diluted in water at a concentration of 10-40%
in water depending on the amount of cement applied. It works both cold and hot. In practice, a temperature of up to 66 oC is recommended for best results.
Recycling helps dissolve the cement. The contact time
is from 2 to 10 hours depending on the case.
To calculate the necessary amount of material needed
It should be borne in mind that 1 kg of product dissolves about 1 kg
Effervescence is observed during the action of the product
of the solution which is due to the release of gas due to the dissolution of the cement. When the effervescence stops it is an indication that either the cement has completely dissolved or the entire amount of DAP-X has been neutralized
Then the system to be cleaned is checked and if it is found that there are still cement residues, a new quantity of product is added and the above procedure is repeated.
When the system is cleaned, rinse with plenty of water,
Contact with skin, clothing and above all with
the eyes. The use of protective equipment such as gloves, masks, glasses, etc. is indicated. In case of infection, rinse immediately with plenty of water.
Also during the cleaning of any system there must be an outlet for the gases that are formed.